The TAIT Austrian system is a series of interlocking trusses comprised of motor and geared cartridge segments used to raise and lower a soft good, such as a curtain or a screen.
TAIT offers different Austrian configurations to accommodate various stage applications and shapes. System K uses curved 355.6 mm x 533.4 mm (14 in x 21 in) truss power, standard and end units to form a curved truss with a central angle of 12°.
Each Austrian system seamlessly integrates with the TAIT Navigator Automation System, allowing for precise speed and motion control.
|Motor Voltage||180 VDC|
|Maximum Speed||0.61 m/s (2.0 ft/s), dependent on configuration|
|Typical Travel||9.75 m (32.0ft)|
|Maximum Curtain Load||340.2 kg (750 lbs)|
(L X W X H)
|2413 mm x 355.6 mm x 533.4 mm (95 in x 14 in x 21in)
2413 mm x 355.6 mm x 533.4 mm (95 in x 14 in x 21in)
990.6 mm x 355.6 mm x 533.4 mm (39 in x 14 in x 21in)
|90.72 kg (200 lbs), approximate
45.36 kg (100 lbs), approximate
22.68 kg (50 lbs), approximate
|Cartridge/Line Spacing||1168.4 mm (46 in)|
|PWR Unit||Left END Unit|
|STD Unit||Right END Unit|
Still Have Questions?
If you have any questions at all--or if you're ready to rent--please contact us. We look forward to hearing from you soon!
Disclaimer: These specifications are general guidelines only and may not be appropriate for your particular project. All product specifications and Data are subject to change without notice. Data, performance features, and images may vary from the final project quote. Issue date: 2021.07.06. Copyright 2021 TAIT Towers Manufacturing, LLC. All rights reserved.
I-CODE: 75505525C (Comp Kit), 75505525 (PWR), 75505530 (STD), 75505535 (L-END),