6002P Winch Spec Sheet – TAIT Support

Key Features

TAIT's largest touring winch
Rated payloads up to 2721.55 kg (6000.0 lbs)
Performer flying rated
Dual bridge load cell
Cross groove and dead wrap detection
Integrates with TAIT Navigator and IQ systems

Description

The TAIT 6002P winch working load limit (WLL) is 2721.55 kg (6000.0 lbs). This is our largest WLL for a touring winch. We have created a novel brake arrangement that provides low braking forces and small overtravel distances via an array of eight independent brake units with fast switching times. Standard features include dual bridge load cell, safe secondary encoder, cross groove detection, dead wrap detection, on board visual camera feedback and LED status lights. Available in right hand or left hand drum configuration. The 6002P is rated for performer flying and can be configured for 1 or 2 lines off the drum. Steel or synthetic 19.05 mm (0.75 in) rope options.

Specifications

Electrical
Motor	Servo
Rated Voltage	380 - 480VAC, 3 Phase
Nominal Current	38.93A
Nominal Power	24.77 kW
Connections
Power	LKH
Network	NAV:COM
Encoder	XLR 8+2
Control	TAIT Navigator, iQ
Mechanical
Working Load Limit	2721.55 kg (6000.0 lbs); total across all lines
Stroke	1 Line: Max 31.709 m (104.03 ft) 2 Lines: Max 12.12 m (39.78 ft)
Speed	0.609 m/s (2.0 ft/s)
Acceleration	0.609 m/s² (2.0 ft/s²)
Rope	19.05 mm (0.75 in) steel or synthetic
Features	Cross groove detection, dual bridge load cell, secondary safe encoder
Construction
Dimensions (L x W x H)	2438.4 mm x 762 mm x 914.4 mm (96.0 in x 30.0 in x 36.0 in)
Weight	952.5 kg (2100.0 lbs)
Certifications
Mechanical compliance	ANSI E1.43, EN17206:2022-02

Dimensions

Side View	End View

Top View

Packaging and Shipping


Dimensions (L x W x H)	2438.4 mm x 762 mm x 914.4 mm (96.0 in x 30.0 in x 36.0 in)
Weight	961.6 kg (2120.0 lbs)

Still Have Questions?

If you have any questions at all--or if you're ready to rent--please contact us. We look forward to hearing from you soon!

Disclaimer: These specifications are general guidelines only and may not be appropriate for your particular project. All product specifications and Data are subject to change without notice. Data, performance features, and images may vary from the final project quote. Issue date: 2024.12.13. Copyright 2024 TAIT Towers Manufacturing, LLC. All rights reserved.

I-CODE: 26818601, 26818611