The T Series Touring Winch handles a range of loads suitable for most touring shows. The fail-safe, compact design with its dual brake set up enables confident performer flying routines and overhead lifting. The winch easily clamps to standard 304.8 mm and 508 mm (12 in and 20 in) box truss with three (3) assembly and three gearing options available. The winch features four (4) rope exit points and directions and can be rigged for single line, dual line or push/pull setup by installing proper internal fairlead and sheaves. Its compact form stacks easily for transport and its construction allows it to withstand daily use and shipping.
|Motor Size||5.5 kW, 7.5 HP|
|Motor Gearbox Ratio||10:1|
|Rated Voltage||200-230 VAC|
|Power||L21-30 Cable, 30A|
|Maximum Line Load||217.72 kg (480 lbs)|
|Maximum Speed||1.5 m/s (4.92 ft/s) to 6.1 m/s (20 ft/s)|
|Travel||Single Line: 60.96 m (200 ft)
Dual Line: 27.43 m (90 ft)
Push Pull: 51.82 m (170 ft)
|Operating Temp||10° C to 35° C (50° F to 95° F), 50% RH|
|Dimensions (L x W x H)||2.09 m x 0.61 x by 0.36 m (6.87 ft x 2 ft x 1.18 ft)|
|Weight (winch only)||249.48 kg (550 lbs)|
|Wire Rope||4.7625 mm (0.1875 in)|
|Belt Path Type||Speed (ft/s)||Load (lbs)||Applications||Capacity (ft) per Application|
|1) Low Torque, High Speed||20||150||S, D, P||S) Single Line: 200 ft + 3 safety wraps|
|2) Standard Torque and Speed||12.5||300||S, D, P||D) Dual Line: 100 ft per line, + 3 safety wraps per line|
|3) High Torque, Low Speed
|P) Push/Pull: 170 ft
All applications: 0.1875 inch line
*Note: Load depends on application.
|Truss Mounts||304.8 mm (12 in), 520.7 mm (20.5 in), or GT truss mount|
|Extras||Adjustable dual line diverter to allow dual line drops from 457.2 mm to 914.4 mm (18 in to 36 in) in 25.4 mm (1 in) increments. Fairlead diverter, transportation skates, line weights, 609.6mm (24 in) spreader bar.|
|Top View||Front View||Side View|
Still Have Questions?
If you have any questions at all--or if you're ready to rent--please contact us. We look forward to hearing from you soon!
Disclaimer: These specifications are general guidelines only and may not be appropriate for your particular project. All product specifications and Data are subject to change without notice. Data, performance features, and images may vary from the final project quote. Issue date: 2017.05.02. Copyright 2020 TAIT Towers Manufacturing, LLC. All rights reserved.