TAIT friction drive trolley provides horizontal movement for video screens, people, or props. The trolley can be rigged to beams directly or used as part of a larger system with the use of link rods and bogies for multiple rigging points. It has an onboard drive with pass through data and power to other tracking TAIT Navigator devices.
Proximity sensors on the trolley are used to define traverse travel limits. Beam clamps attached to the I-beam act as 'flags' for the proximity sensors to easily customize the travel profile for each venue.
Seamlessly integrates with the TAIT Navigator Automation System, allowing for precise speed and motion control.
|Motor Phase||3 PH + N + GND|
|Rated Power||4A @ 208VAC Max.|
|Power||Harting 3A mated with custom PDU and 3A cable|
|Control System||TAIT Navigator|
|Max Speed||1.52 m/s (5.0 ft/s); dependent on payload configuration/weight|
|Dimensions (L x W x H)||914.4 mm 355.6 mm x 184.2 mm (36.0 in x 14.0 in x 7.25 in)|
|Weight||68.04 kg (150.0 lbs)|
|Trolley Power Distribution Unit (PDU)||One PDU can support up to 6 individual Trolleys or two Trolleys daisy chained per PDU output for total of 12 Trolleys|
|Front View||Side View|
Still Have Questions?
If you have any questions at all--or if you're ready to rent--please contact us. We look forward to hearing from you soon!
Disclaimer: These specifications are general guidelines only and may not be appropriate for your particular project. All product specifications and Data are subject to change without notice. Data, performance features, and images may vary from the final project quote. Issue date: 2022.11.02 Copyright 2022 TAIT Towers Manufacturing, LLC. All rights reserved.