Andrew Penney

  • Total activity 27
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 12
  • Subscriptions 6

Activity overview

Latest activity by Andrew Penney
  • Andrew Penney created a post,

    Move Up/Dn Shortcut available in IO Master

    When creating IO master modules or assemblies it would be helpful if Ctrl-UpArrow and Ctrl-DnArrow moved the modules, Functions, Events Etc up or down.  It is currently possible, but this requires ...

  • Andrew Penney created a post,

    Deadband IO Function

    Would it be possible to create a deadband function for both IO masters and IO Functions?

  • Andrew Penney created a post,

    Ability to specify 3D move Jerk

    Currently when writing a cue with a 3D space move, it will only take the default jerk of that object.  It would be great to be able to specify it in the cue editor.    

  • Andrew Penney created a post,

    ECat Register customization

    Would it be possible to add "D-Styles" for Digital I/O to the node properties when "Enable Register Customization" is checked for modules in a Module?

  • Andrew Penney commented,

    I will give this a shot on my next adventure thanks!

  • Andrew Penney commented,

    I thought this was for network based licenses? I was unaware that this was also used to connect to a secure device.

  • Andrew Penney created a post,

    Accessing Secure Device on first login

    It would be very helpful to be able to set some communication parameters so that a GUI can connect to a secure device without needing to know its GUI admin password

  • Andrew Penney commented,

    Exactly.  Basically I have axes/ios with mapping and rules and whatnot, and when I use these as a template to copy and paste, and I change the ECAT interface, the only "easy" way to adjust the inte...

  • Andrew Penney created a post,

    Axis Mapping ECAT interface selection

    It would be super handy to be able to have an Axis either natively know what interface an IO is on or have this be a selectable drop down.  This way you do not have to re-map the whole axis.  (.......