
Tom Gibberd
Automation Supervisor at Glyndebourne
- Total activity 137
- Last activity
- Member since
- Following 1 user
- Followed by 1 user
- Votes 5
- Subscriptions 58
Activity overview
Latest activity by Tom Gibberd-
Tom Gibberd commented,
Hi Phillip, We operate in a rep environment so are very used to enabling/disabling rules depending on the day. We manage this by having a sim IO device with a bit for every show, and any show spec...
-
Tom Gibberd commented,
Nice suggestion Joe! That does indeed de-risk the effect. Appreciate it. Tom
-
Tom Gibberd commented,
Already in place via custom position error monitoring, however the function of a locked group is to stop this sort of inadvertent action from being possible under normal control.
-
Tom Gibberd commented,
In the example above I would not want a user to be able to move either axis individually, as this would either put the system into too much tension, or cause it to go slack. In other words I would...
-
Tom Gibberd created a post,
Locking a group by command or rule
I have an upcoming show where there is a tracking stage element needed, but is only present in act 3, and the rigging system needs to be put in place during a quick change. Space and time restricti...
-
Tom Gibberd commented,
I have reliable sources on site at the moment who have confirmed that it may look like it’s working, it only takes the value at the beginning of the move. (Kim can you confirm either way)
-
Tom Gibberd created a post,
Anti Sway
It would be great for axis level anti sway to recognise changing wire length throughout a move, rather than being limited to initial wire length?
-
Tom Gibberd created a post,
Secure Device: IQ
Can an option be added in the secure device to block users that are 'IQ only' from being able to log into a Navigator GUI?
-
Tom Gibberd commented,
Tip from another IQ user - If you click on the block or select multiple blocks, you should be able to use Ctrl+C in the CLE, click in a channel and Ctrl+V to be able to run that sequence? Tom
-
Tom Gibberd created a post,
Multi channel cue list - separator or similar
When sending specific blocks to channels 1-3 it would be useful to have the ability to add a separator style notation. Eg. If I have sent a block to channel 1 which has auto start disabled because ...