Tom Gibberd
Automation Supervisor at Glyndebourne
- Total activity 124
- Last activity
- Member since
- Following 1 user
- Followed by 0 users
- Votes 4
- Subscriptions 54
Posts
Recent activity by Tom Gibberd-
Multi channel cue list - separator or similar
When sending specific blocks to channels 1-3 it would be useful to have the ability to add a separator style notation. Eg. If I have sent a block to channel 1 which has auto start disabled because ...
-
Feature request - Limit Dec input by rule
More of a nav item - but is relevant to needing to work around show repository limitations currently. You are not currently able to restrict Dec values by rule, I imagine that this is because it ma...
-
Feature request - Warning on Acc value outside of rule limits
When an axis has a limitation on the acceleration value, you are still able to enter a higher value in the AVD. This means that if the Acc is restricted throughout the move the timing is not accura...
-
Feature request - Warning on target position when outside rule position limits
When an axis has been position limited, you are still able to enter a target position which is not obtainable. To overcome this can the target input box text be yellow/orange when entering a target...
-
Webpanels: Analogue indicator style
When setting up analogue indicator styles recently I had an an indicator made with three styles working as I wanted. When a change was needed at the top end of the analogue range the only way for m...
-
AVD graph within CLE
It would be useful to have a dynamic AVD graph within the CLE timing window, this would be to aid an operator in visualising the how altering individual figures affects the overall move. Sometimes...
-
Text File Option Within Show Repository
Could the ability to have a text file be added to the SR? The usage I'm thinking of is to have a 'read me' file which operators can pass information over in, or to denote which cue list is the most...
-
Channel view: device window
As the channel view is build out of a device window, it is limited to only displaying an axis/group once within the window (hence the need for the multiple channels tab). This becomes frustrating w...
-
Cue type request: Set speed scale slider
Can the ability to set the speedscale slider as part of a cue line be brought into IQ? I have been able to write this cue line in Nav and add it to a SR cue list, however this is not ideal for oper...
-
Using show offset from device presets when linked
It would be nice to use offset positions when a device is linked. example: Full black is 8m deep, in in dead would be set in show repository for 0mm and out dead @ 9000mm, show offset set @8000mm....