
Tom Gibberd
Automation Supervisor at Glyndebourne
- Total activity 137
- Last activity
- Member since
- Following 1 user
- Followed by 1 user
- Votes 5
- Subscriptions 58
Posts
Votes on activity by Tom Gibberd-
Variable speed jogging
I find the standard joystick setup on the Epiq is not as dexterous as I would expect, I would suggest having two modes for jog control that can be activated by the buttons on top of the joystick. S...
-
Cue type request: Set speed scale slider
Can the ability to set the speedscale slider as part of a cue line be brought into IQ? I have been able to write this cue line in Nav and add it to a SR cue list, however this is not ideal for oper...
-
Feature request - Warning on target position when outside rule position limits
When an axis has been position limited, you are still able to enter a target position which is not obtainable. To overcome this can the target input box text be yellow/orange when entering a target...
-
'Default' preset
Can the 'default' position preset be made to not be persistent?
-
Having two repository windows open on the touch screen
When swapping between shows, a quick workflow would be to have two show repository tabs open for the different shows, if you wanted to view them side by side on the touch screen to avoid having to ...
-
Releasing HTR mid cue running
When a HTR is released mid cue, the cue that is running gets canceled and the channel advances to the next cue. This seems counterintuitive, especially if it were an accidental release of HTR. Expe...
-
Presets displaying within device window
When a device is on a preset, can this be displayed next to the position data? Eg. when an axis in on its 'OUT' dead at 7000mm, on the device windows can the fact its on a preset be displayed next ...
-
Console locking
When the Epiq console is locked, there is just one obvious button to unlock with no password protection behind it. Can a password on unlock be added?
-
Locking a group by command or rule
I have an upcoming show where there is a tracking stage element needed, but is only present in act 3, and the rigging system needs to be put in place during a quick change. Space and time restricti...
-
Anti Sway
It would be great for axis level anti sway to recognise changing wire length throughout a move, rather than being limited to initial wire length?